Floor Scraper Systems

Designed with your operation in mind, the IntelliChain^® II, II HD, and MAX Scraper systems have the brawn and the brains needed to keep your facility clean 24/7/365.

SENTINEL CONTROL PANEL
The Sentinel control system is completely programmable with Manual, Continuous, and Automatic modes (up 12 daily cycles). Additional features include speed control, safety stop/reverse, and maintenance management.

SENSOR CONTROL
Sensor disc and proximity sensors work in conjunction to provide the SmartSense^® Control Panel necessary information to keep track of the scraper’s position and direction.

LOW-PROFILE CORNER WHEEL
12” (305 mm) nominal diameter welded plate steel corner wheels feature a low-profile design. 2” (51 mm) diameter hardened axle and nylon sleeve bearings provide low maintenance and long life.

POCKET SPROCKET
Pocket sprocket cradles the chain, effectively driving it in forward or reverse. Connected to the reducer with a tapered bushing, the pocket sprocket is easy to replace (sprockets available in four different colored stages for easy identification).

DRIVE UNIT CONFIGURATIONS OPTIONS
Drive unit corner wheels can be placed in straight, corner, parallel, or offset mounting formations for layout flexibility and space savings. Steel housing encloses through-hardened drive unit corner wheels for safety and protection. Corner wheels feature nylon bushings for longer life.

FOLDING V SCRAPERS
Wings fold together on reverse travel, allowing material to pass around scraper. Lower profile than angled tip-up scrapers. Suitable for alleys with widths from 64 to 174 in (1.6-4.4 m).

VERSA FOLDING V SCRAPER
This versatile, low-profile scraper is available in 6, 8, 10, 12, and 14 foot sizes to clean alleys with widths from 64 – 174 in. Choose from three economical, replaceable blade edges: AR400 steel, rubber, or urethane.

FOLDING ANGLED TIP-UP SCRAPERS
Wings pivot to follow wall tightly for better cleaning; blades tip up and wings pivot inward on reverse movement. Choose from standard or short sled lengths. Suitable for alleys with widths from 84 – 192 in (2.1-4.9 m).

CHOICE OF SLEDS
Standard or short sleds available for on-floor and recessed chain installations. Standard 56 1/2″ (1,435 mm) sleds provide better scraper stability, while 36 1/2″ (927 mm) sleds are available where a shorter sled is required. Slider sleds allow chain to pass through for installations with unequal alley lengths.

FOR RUBBER FLOORING
Hard nylon rollers located on sled ends and scraper arms position the scraper above the rubber covered alleys, ensuring only rubber blades touch rubber flooring.

3/4 -3 horsepower electric motor

IntelliChain® II –  1,000 feet (305 m)
IntelliChain® II HD – 1,800 feet (549 m)
IntelliChain® MAX – 3,600 feet (1,097 m)

Perfect for concrete alleys or rubber flooring. The IntelliCable^® Scraper system automatically cleans on a precise schedule.

SMARTSENSE^® MASTERMIND CONTROL PANEL
The SmartSense^® control system is completely programmable with Manual, Continuous, and Automatic modes (up 12 daily cycles). Additional features include speed control, safety stop/reverse, and maintenance management.

SENSOR CONTROL
Drive unit design includes sensor disc and proximity sensors to provide the control panel with the necessary information to keep track of scraper’s position and direction.

CHOICE OF CABLE
For Pro II or Pro III Units:

• 3/8″ Galvanized or Stainless Steel Cable
• 7/16″ Galvanized or Stainless Steel Cable
• 1/2″ Galvanized or Stainless Steel Cable
• 3/8″ Plastic Jacketed Galvanized Steel Cable: Superior wear resistance against stretching, fraying, sand, and sawdust. Provides longer service life than steel cable.

SELF-LOCKING RATCHET SYSTEM
The self-locking ratchet system allows easy tightening of cable.

PATZ PROVEN PERFORMER CORNER WHEEL
16” (406 mm) diameter cast iron corner wheels feature stainless steel fasteners as standard components. Corner wheels accept 3/8”, 7/16” or 1/2” cable. Phenolic with graphite sleeve bearings for longer life.

FOLDING ANGLED TIP-UP SCRAPER
Wings pivot to follow wall tightly for better cleaning; blades tip up and the wings pivot inward on reverse movement. Suitable for alleys with widths from 84 to 192 inches (2.1-4.9 m).

VERSA FOLDING V SCRAPER
This versatile, low-profile scraper is available in 6, 8, 10, 12, and 14 foot sizes to clean alleys with widths from 64 to 174 inches. Choose from three economical, replaceable blade edges: AR400 steel, rubber, or urethane.

CHOICE OF SLEDS
Standard or short sleds available. Standard 57″ (1,448 mm) sleds provide better scraper stability, while 37″ (940 mm) sleds are available where a shorter sled is required.

FOR RUBBER FLOORING
Hard nylon rollers located on sled ends and scraper arms position the scraper above the rubber covered alleys, ensuring only rubber blades touch rubber flooring

IntelliCable^® Pro II
¾ horsepower electric motor

IntelliCable^® Pro III
¾ horsepower electric motor

IntelliCable^® Pro II & Pro III

• ³⁄₈” Galvanized or Stainless Steel
• ⁷⁄₁₆” Galvanized or Stainless Steel
• ½” Galvanized or Stainless Steel
• ³⁄₈” Cable with Plastic Jacket

IntelliCable^® Pro II

• ½” cable: 215 feet (66 m)
• ⁷⁄₁₆” cable: 250 feet (76 m)
• ³⁄₈” cable: 280 feet (85 m)

IntelliCable^® Pro III

• ½” cable: 440 feet (134 m)
• ⁷⁄₁₆” cable: 510 feet (155 m)
• ³⁄₈” cable: 570 feet (174 m)

IntelliCable^® Pro II

• ½” cable: 850 feet (259 m)
• ⁷⁄₁₆” cable: 1000 feet (305 m)
• ³⁄₈” cable: 1100 feet (335 m)

IntelliCable^® Pro III

• ½” cable: 1760 feet (536 m)
• ⁷⁄₁₆” cable: 2040 feet (622 m)
• ³⁄₈” cable: 2280 feet (695 m)

The IntelliShuttle^® II Chain and Cable Box Scraper systems handle your materials from alley to reception pit up to 460 ft. (140 m).

SMARTSENSE^® EXPERT AND SENTINEL CONTROL PANEL
Our UL/cUL certified SmartSense® Expert Control Panel features an easy-to-use, 4.3” (109 mm), color touch screen display.

OPERATIONAL MODES
3 operational modes: MANual, CONTinuous and AUTOmatic (schedule up to 12 cycles per day).

CHOICE OF CABLE
Choose from a galvanized or stainless steel cable.

SAFETY FEATURES
Integrated LOCK-OUT/TAG-OUT power disconnect lever.

3/4 horsepower electric motor

5

460 feet (140 m)